湿法消解-原子荧光法测定全血中硒

以全血样品为原料,探讨湿法消解-原子荧光法测定全血中的硒含量。血样经硝酸-高氯酸消解后,用硼氢化钠将硒还原成硒化氢,由氩气载入原子化器,产生的原子荧光强度与试液中硒元素含量在一定范围内呈正比,外标法定量。以消解效率为指标,优化样品的消解条件,测定血中硒在0-10μg/L范围内线性情况良好,相关系数为0.9992,最低检出限为0.143μg/L,相对标准偏差为1.51%-1.58%,平均加标回收率为90.86%-104.62%。血中硒的原子荧光测定法灵敏度高,精密度和稳定性好,可应用于血中硒的生物监测。     

原子分子光子系统的耗散相互作用和退相干

原子分子系统与量子化的电磁场或光子模式耦合的系统是非相对论量子力学理论研究和实验研究的主要对象和模型. 现实系统必然与外界环境耦合，且即便原子隔绝较好、光学腔壁品质因子足够高，原子系统也不等价于少数几个能级构成的简单模型：它仍然有不为零的几率跃迁到不可控的能级空间、与原子相互作用的自由空间真空场的量子效应也必须考虑. 本文将结合开放量子系统理论的基本要素与原子光子的基本模型，对原子分子系统在电磁场中发生的耗散以及量子退相干过程做简单综述，并重点介绍描述量子系统退相干过程的主流理论工具——主方程.     

An improved LC–MS/MS method for determination of docetaxel and its application to population pharmacokinetic study in Chinese cancer patients

Because of its unpredictable side effects and efficacy, the anticancer drug docetaxel (DTX) requires improved characterisation of its pharmacokinetic profiles through population pharmacokinetic studies. A sensitive and rugged LC–MS/MS method for the detection of DTX in human plasma was developed and optimised using paclitaxel as an internal standard (IS). The plasma samples underwent rapid extraction using hybrid solid-phase extraction-protein precipitation. The analyte and IS were separated with an isocratic system on a Zorbax Eclipse Plus C₁₈ column using water containing 0.05% acetic acid along with 20 μM of sodium acetate and methanol (30/70, v/v) as the mobile phase. Quantification was performed using a triple quadrupole mass spectrometer through multiple reaction monitoring in positive mode, using the m/z 830.3 → 548.8 and m/z 876.3 → 307.7 transitions for DTX and paclitaxel, respectively. The range of the calibration curve was 1–500 ng/mL for DTX, and the linear correlation coefficient was >0.99. The accuracies ranged from −4.6 to 4.2%, and the precision was no higher than 7.0% for the analytes. No significant matrix effect was observed. Both DTX and the IS showed considerable recovery. This method was finally applied to the establishment of a population pharmacokinetic model to optimise the clinical use of DTX.     

Research and Evaluation on Wear in Power-Shift Steering Transmission Through Oil Spectral Analysis with RKPCA Method

The most common methodology used in element concentration measurement and analyzing of wear particles is Atomic emission (AE) spectroscopy .The present paper presents an evaluation method on wear in po...     

“原子结构”教学中引入哲学理念

The structural discovery and understanding of atoms are a microcosm of the process of human cognition and a concrete practice of materialistic dialectics and methodology, which contains a wealth of dialectical thought. The "atomic structure" chapter (section) in inorganic chemistry course is a difficult part for the first-year undergraduates to understand. The introduction of philosophical idea into the teaching process of this chapter (section) will not only help them learn and master chemistry, but also help them establish a correct world view and methodology.     

A classification of continuous wavelet transforms in dimension three

This paper presents a full catalogue, up to conjugacy and subgroups of finite index, of all matrix groups $H<\mathrm{GL}(3,\mathbb{R})$ that give rise to a continuous wavelet transform with associated irreducible quasi-regular representation. For each group in this class, coorbit theory allows to consistently define spaces of sparse signals, and to construct atomic decompositions converging simultaneously in a whole range of these spaces. As an application of the classification, we investigate the existence of compactly supported admissible vectors and atoms for the groups.     

Column preconcentration and electrothermal atomic absorption spectrometric determination of rhodium in some food and standard samples

In the present work, an electrothermal atomic absorption spectrometric method has been developed for the determination of ultra‐trace amounts of rhodium after adsorption of its 2‐(5‐bromo‐2‐pyridylazo)‐5‐diethylaminophenol/tetraphenylborate ion associated complex at the surface of alumina. Several factors affecting the extraction efficiency such as the pH, type of eluent, sample and eluent flow rates, sorption capacity of alumina and sample volume were investigated and optimized. The relative standard deviation for eight measurements of 0.1 ng/mL of rhodium was ±6.3%. In this method, the detection limit was 0.003 ng/mL in the original solution. The sorption capacity of alumina and the linear range for Rh(III) were evaluated as 0.8 mg/g and 0.015–0.45 ng/mL in the original solution, respectively. The proposed method was successfully applied for the extraction and determination of rhodium content in some food and standard samples with high recovery values.     

Modeling the depletion of dissolved oxygen in a water body located near a city

Water bodies located nearby cities are much prone to pollution, especially in the developing countries, where effluents treatment facilities are generally lacking. The main reason for this phenomenon is the increasing population in the cities, and the large number of industries located near them. This leads to generation of huge amounts of domestic and industrial sewage that is discharged into the water bodies, increasing their organic pollutant load and resulting in the depletion of dissolved oxygen. In this paper, we propose a mathematical model for this situation, focusing especially on the resulting quality of the water, determined by the level of dissolved oxygen. The model also accounts for resources needed for the population survival and for the industrial operations. In addition, we describe also the decomposition of organic pollutants by bacteria in the aquatic medium. Feasibility conditions and stability criteria of the system's equilibria are determined analytically. The results show that human population and industries are relevant influential factors responsible for the increase in organic pollutants and the decrease in dissolved oxygen in the water body, in the sense that they may exert a destabilizing effect on the system. The numerical simulations confirm the analytical results. Copyright © 2016 John Wiley & Sons, Ltd.     

Exploring the Interactions of Atomic Oxygen on Silver Clusters with Hydrogen

The interactions between Ag_nO^-(n=1-8) and H₂ (or D₂) were explored by combination of the mass spectroscopy experiments and density function theory (DFT) calculations. The experiments found that all oxygen atoms in Ag_nO^-(n=1-8) are inert in the interactions with H₂ or D₂ at the low temperature of 150 K, which is in contrast to their high reactivity with CO under the same condition. These observations are parallel with the preferential oxidation (PROX) of CO in excess hydrogen catalyzed by dispersed silver species in the condensed phase. Possible reaction paths between Ag_nO^-(n=1-8) and H₂ were explored using DFT calculations. The results indicated that adsorption of H₂ on any site of Ag_nO^-(n=1-8) is extremely weak, and oxidation of H₂ by any kind of oxygen in Ag_nO^-(n=1-8) has an apparent barrier strongly dependent on the adsorption style of the "O". These experiments and theoretical results about cluster reactions provided molecule-level insights into the activity of atomic oxygen on real silver catalysts.     

Tuning the properties of a black TiO2-Ag visible light photocatalyst produced by a rapid one-pot chemical reduction

A highly efficient black TiO₂-Ag photocatalytic nanocomposite, active under both UV and visible light illumination, was synthesized by decorating the surface of 25 nm TiO₂ particles with Ag nanoparticles. The material was obtained via a rapid, one-pot, simple (surfactant and complexing agent free) chemical reduction method using silver nitrate and formaldehyde as a metal salt and reducing agent, respectively. The nanocomposite shows an increase of over 800% in the rate of photocatalytic methylene blue dye degradation, compared to commercial unmodified TiO_2, under UV-VIS illumination. Unlike pure TiO₂, the nanocomposite exhibits visible light activation, with a corresponding drop in optical reflectance from 100% to less than 10%. The photocatalytic properties were shown to be strongly enhanced by post-reduction annealing heat treatments in air, which were observed to decrease, rather than coarsen, silver particle size, and increase particle distribution. This, accompanied by a variation in the silver surface oxidation states, appear to dramatically affect the photocatalytic efficiency under both UV and visible light. This highly active photocatalyst could have wide ranging applications in water and air pollution remediation and solar fuel production.